YG-1 73480CN E2248 Center Cut Imperial Regular Length Single End Roughing and Finishing End Mill, 2 in Dia Cutter, 2 in Length of Cut, 8 Flutes, 2 in Dia Shank, 5-3/4 in OAL, TiN Coated
YG1 73480CN
$677.42
/ EA
Out of Stock
- Mill Diameter: 2 in
- Mill Diameter - Decimal: 2 in
- Mill Diameter - Metric: 50.8 mm
- Pitch: Coarse
- Length of Cut: 2 in
- Shank Diameter: 2 in
- Shank Diameter - Decimal: 2 in
- Shank Diameter - Metric: 50.8 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiN-Coated
- Overall Length: 5-3/4 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Diameter: 2 in
- Diameter - Decimal: 2 in
- Diameter - Metric: 50.8 mm
- Length of Cut - Decimal: 2 in
- Length of Cut - Metric: 50.8 mm
- Length Type: Regular
- Number of Flutes: 8
- Overall Length - Decimal: 5.75 in
- Overall Length - Fractional: 5-3/4 in
- Overall Length - Metric: 146.05 mm
- Shank Type: Flat
- Single or Double End: Single End
- Flute Type: Spiral
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.