YG-1 75313CF E2086 Center Cut Fine Pitch Imperial Stub Length Roughing End Mill, 7/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL, TiAlN Futura Coated
YG1 75313CF
$62.48
/ EA
Out of Stock
- Mill Diameter: 7/16 in
- Mill Diameter - Decimal: 0.4375 in
- Mill Diameter - Fractional: 7/16 in
- Mill Diameter - Metric: 11.11 mm
- Pitch: Fine
- Length of Cut: 1/2 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Futura Coated
- Overall Length: 2-1/2 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 7/16 in
- Diameter - Fractional: 7/16 in
- Flute Size: 1/2 in
- Length of Cut - Decimal: 0.5 in
- Length of Cut - Fractional: 1/2 in
- Length of Cut - Metric: 12.7 mm
- Length Type: Stub Length
- Number of Flutes: 4
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
- Shank Type: Flat
- Type: Center Cutting
- Flute Type: Spiral
- Diameter - Decimal: 0.4375 in
- Diameter - Metric: 11.11 mm
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.