YG-1 75337CE E2086 Center Cut Fine Pitch Imperial Stub Length Roughing End Mill, 5/8 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 2-3/4 in OAL, TiAlN Extreme Coated
YG1 75337CE
$82.19
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.875 mm
- Pitch: Fine
- Length of Cut: 5/8 in
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Extreme Coated
- Overall Length: 2-3/4 in
- Centercutting: Centercutting
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 0.625 in
- Length of Cut - Fractional: 5/8 in
- Length of Cut - Metric: 15.875 mm
- Overall Length - Decimal: 2.75 in
- Overall Length - Fractional: 2-3/4 in
- Overall Length - Metric: 69.85 mm
- Number of Flutes: 4
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.