YG-1 75391CF E2086 Center Cut Fine Pitch Imperial Stub Length Roughing End Mill, 7/8 in Dia Cutter, 7/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3-1/8 in OAL, TiAlN Futura Coated
YG1 75391CF
$119.04
/ EA
Out of Stock
- Mill Diameter: 7/8 in
- Mill Diameter - Decimal: 0.875 in
- Mill Diameter - Fractional: 7/8 in
- Mill Diameter - Metric: 22.22 mm
- Pitch: Fine
- Length of Cut: 7/8 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Futura Coated
- Overall Length: 3-1/8 in
- Centercutting: Centercutting
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 0.875 in
- Length of Cut - Fractional: 7/8 in
- Length of Cut - Metric: 22.23 mm
- Number of Flutes: 5
- Overall Length - Decimal: 3.125 in
- Overall Length - Fractional: 3-1/8 in
- Overall Length - Metric: 79.375 mm
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.