YG-1 76297CN E2085 Center Cut Fine Pitch Imperial Regular Length Single End Roughing End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, TiN Coated
YG1 76297CN
$42.01
/ EA
Out of Stock
- Mill Diameter: 1/4 in
- Mill Diameter - Decimal: 0.25 in
- Mill Diameter - Fractional: 1/4 in
- Mill Diameter - Metric: 6.35 mm
- Pitch: Fine
- Length of Cut: 5/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiN-Coated
- Overall Length: 7/16 in
- Centercutting: Centercutting
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 0.625 in
- Length of Cut - Fractional: 5/8 in
- Length of Cut - Metric: 15.875 mm
- Number of Flutes: 3
- Overall Length - Decimal: 2.4375 in
- Overall Length - Fractional: 2-7/16 in
- Overall Length - Metric: 61.9125 mm
- Single or Double End: Single End
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.