YG-1 76328CE E2085 Center Cutting Regular Length End Mill, 9/16 in Dia Cutter, 1-3/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-3/8 in OAL, TiAlN Extreme Coated
YG1 76328CE
$79.14
/ EA
Out of Stock
- Mill Diameter: 9/16 in
- Mill Diameter - Decimal: 0.5625 in
- Mill Diameter - Fractional: 9/16 in
- Mill Diameter - Metric: 14.28 mm
- Pitch: Fine
- Length of Cut: 1-3/8 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Extreme Coated
- Overall Length: 3/8 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 9/16 in
- Diameter - Fractional: 9/16 in
- Diameter - Metric: 14.28 mm
- Flute Size: 1-3/8 in
- Length of Cut - Decimal: 1.375 in
- Length of Cut - Fractional: 1-3/8 in
- Length of Cut - Metric: 34.925 mm
- Length Type: Regular
- Number of Flutes: 4
- Overall Length - Decimal: 3.375 in
- Overall Length - Fractional: 3-3/8 in
- Overall Length - Metric: 85.725 mm
- Shank Type: Flat
- Type: Center Cutting
- Diameter - Decimal: 0.5625 in
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.