YG-1 76337CC E2085 Center Cutting Regular Length End Mill, 5/8 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL, TiCN Coated
YG1 76337CC
$110.22
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.875 mm
- Pitch: Fine
- Length of Cut: 1-5/8 in
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 3/4 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 5/8 in
- Diameter - Fractional: 5/8 in
- Diameter - Metric: 15.87 mm
- Flute Size: 1-5/8 in
- Length of Cut - Decimal: 1.625 in
- Length of Cut - Fractional: 1-5/8 in
- Length of Cut - Metric: 41.28 mm
- Length Type: Regular
- Number of Flutes: 4
- Overall Length - Decimal: 3.75 in
- Overall Length - Fractional: 3-3/4 in
- Overall Length - Metric: 95.25 mm
- Shank Type: Flat
- Type: Center Cutting
- Diameter - Decimal: 0.625 in
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.