YG-1 76359CC E2085 Center Cut Fine Pitch Imperial Regular Length Roughing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, TiCN Coated
YG1 76359CC
$104.12
/ EA
Out of Stock
- Mill Diameter: 3/4 in
- Mill Diameter - Decimal: 0.75 in
- Mill Diameter - Fractional: 3/4 in
- Mill Diameter - Metric: 19.05 mm
- Pitch: Fine
- Length of Cut: 1-5/8 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 7/8 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 3/4 in
- Flute Size: 1-5/8 in
- Length of Cut - Decimal: 1.625 in
- Length of Cut - Fractional: 1-5/8 in
- Length of Cut - Metric: 41.28 mm
- Length Type: Regular
- Overall Length - Decimal: 3.875 in
- Overall Length - Fractional: 3-7/8 in
- Overall Length - Metric: 98.425 mm
- Shank Type: Flat
- Type: Center Cutting
- Flute Type: Spiral
- Diameter - Metric: 19.05 mm
- Diameter - Decimal: 0.75 in
- Diameter - Fractional: 3/4 in
- Number of Flutes: 4
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.