YG-1 76422CE E2085 Center Cut Fine Pitch Imperial Regular Length Roughing End Mill, 1 in Dia Cutter, 2 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4-1/4 in OAL, TiAlN Extreme Coated
YG1 76422CE
$191.16
/ EA
Out of Stock
- Mill Diameter: 1 in
- Mill Diameter - Decimal: 1 in
- Mill Diameter - Metric: 25.4 mm
- Pitch: Fine
- Length of Cut: 2 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Extreme Coated
- Overall Length: 1/4 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 1 in
- Diameter - Metric: 25.4 mm
- Flute Size: 2 in
- Length of Cut - Decimal: 2 in
- Length of Cut - Metric: 50.8 mm
- Length Type: Regular
- Number of Flutes: 5
- Overall Length - Decimal: 4.25 in
- Overall Length - Fractional: 4-1/4 in
- Overall Length - Metric: 107.95 mm
- Shank Type: Flat
- Type: Center Cutting
- Flute Type: Spiral
- Diameter - Decimal: 1 in
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.