YG-1 57570TC E5075 JET-POWER Stub Length End Mill, 7/32 in Dia Cutter, 3/8 in Length of Cut, 3 Flutes, 1/4 in Dia Shank, 2 in OAL, TiCN Coated
YG1 87570TC
$43.06
/ EA
Out of Stock
- Material: Carbide
- Taper Angle Per Side: 10 deg
- Shank Diameter: 0.25 in
- Shank Diameter - Decimal: 0.25 in
- Shank Diameter - Fractional: 1/4 in
- Shank Diameter - Metric: 6.35 mm
- Length of Cut: 0.5 in
- Number of Flutes: 3
- Helix Angle: 30 Degree
- Finish/Coating: TiCN
- Overall Length: 3 in
- Centercutting: Center Cutting
- Diameter - Fractional: 1/4 in
- Diameter - Metric: 6.35 mm
- Length of Cut - Decimal: 0.5 in
- Length of Cut - Fractional: 1/2 in
- Length of Cut - Metric: 12.7 mm
- Length Type: Regular Length
- Mill Diameter: 0.0938 in
- Mill Diameter - Decimal: 0.0938 in
- Mill Diameter - Fractional: 3/32 in
- Mill Diameter - Metric: 2.3813 mm
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: E5077
- Diameter - Decimal: 0.25 in
3 Flute Regular Length Tapered Ticn-Coated Carbide
- Designed For Milling Die Cavity
- Many Different Center Line Angles Are Available On Your Job Requirement.
Yg-1 Cutting Tools 87570Tc Material Carbide | Taper Angle Per Side 10 Degree | 3/32 In | 1/4 In | Tapered End Mill