YG-1 99672 D-Power EI971 Ball Nose Center Cut High Performance Imperial Long Length End Mill, 1/8 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 3-1/4 in OAL, Diamond Coated
YG1 99672
$112.21
/ EA
- Mill Diameter: 0.125 in
- Mill Diameter - Decimal: 0.125 in
- Mill Diameter - Fractional: 1/8 in
- Mill Diameter - Metric: 3.175 mm
- Number of Flutes: 2
- Length of Cut: 0.625 in
- Material: Carbide
- Overall Length: 3.25 in
- Shank Diameter: 0.125 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Finish/Coating: Diamond
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Corner Radius: 1/16 in
- Cutting Direction: Right Hand
- Diameter: 1/8 in
- End Type: Ball Nose
- Finish: Diamond
- Length of Cut - Decimal: 0.625 in
- Length of Cut - Fractional: 5/8 in
- Length of Cut - Metric: 15.87 mm
- Length Type: Long Length
- Neck Diameter: 0.12 in
- Neck Diameter - Decimal: 0.12 in
- Neck Diameter - Metric: 348 mm
- Overall Length - Decimal: 3.25 in
- Overall Length - Fractional: 3-1/4 in
- Overall Length - Metric: 82.55 mm
- Type: High Performance
- Flute Type: Spiral
- Diameter - Fractional: 1/8 in
- Diameter - Metric: 3.175 mm
- Diameter - Decimal: 0.125 in
- Flute Direction: Right Hand
Features and Benefits:
High Hardness of Film and Excellent Wear-Resistance Increase the Tool Life Surprisingly, Ultra Fine Film of YG-1'S Diamond Coated Carbide Ball End Mills ensure the Smooth and Excellent Surface on work Materials, High Performance on Graphite, Wrought Aluminum, Bakelite, Plastics, Wood, Brass, etc., YG-1'S Diamond Coated Carbide Ball End Mills may have Good Result for the Machining of Non-Ferrous Metals and Non-Metallic Materials.
High Hardness of Film and Excellent Wear-Resistance Increase the Tool Life Surprisingly, Ultra Fine Film of YG-1'S Diamond Coated Carbide Ball End Mills ensure the Smooth and Excellent Surface on work Materials, High Performance on Graphite, Wrought Aluminum, Bakelite, Plastics, Wood, Brass, etc., YG-1'S Diamond Coated Carbide Ball End Mills may have Good Result for the Machining of Non-Ferrous Metals and Non-Metallic Materials.