
YG-1 EIB07902 D-Power ElB07 Ball Nose Center Cut High Performance Imperial Long Reach Regular Length End Mill With Neck, 3/64 in Dia Cutter, 9/64 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 3 in OAL, Diamond Coated
YG1 EIB07902
$83.12
/ EA
Out of Stock
- Mill Diameter: 0.0469 in
- Mill Diameter - Decimal: 0.0469 in
- Mill Diameter - Fractional: 3/64 in
- Mill Diameter - Metric: 1.19 mm
- Number of Flutes: 4
- Length of Cut: 0.1406 in
- Material: Carbide
- Overall Length: 3 in
- Shank Diameter: 0.125 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Finish/Coating: Diamond
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Corner Radius: +/- 08 in
- Cutting Direction: Right Hand
- Diameter: 3/64 in
- Diameter - Decimal: 04687 in
- End Type: Ball Nose
- Finish: Diamond
- Flute Direction: Right Hand
- Flute Type: Helix
- Length of Cut - Decimal: 0.1406 in
- Length of Cut - Fractional: 9/64 in
- Length of Cut - Metric: 3.57 mm
- Length Type: Long Length
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Diameter - Fractional: 3/64 in
- Diameter - Metric: 1.19 mm
- Type: High Performance
Features and Benefits:
High Hardness of Film and Excellent Wear-Resistance Increase the Tool Life Surprisingly, Ultra Fine Film of YG-1'S Diamond Coated Carbide Ball End Mills ensure the Smooth and Excellent Surface on work Materials, High Performance on Graphite, Wrought Aluminum, Bakelite, Plastics, Wood, Brass, etc., YG-1'S Diamond Coated Carbide Ball End Mills may have Good Result for the Machining of Non-Ferrous Metals and Non-Metallic Materials.
High Hardness of Film and Excellent Wear-Resistance Increase the Tool Life Surprisingly, Ultra Fine Film of YG-1'S Diamond Coated Carbide Ball End Mills ensure the Smooth and Excellent Surface on work Materials, High Performance on Graphite, Wrought Aluminum, Bakelite, Plastics, Wood, Brass, etc., YG-1'S Diamond Coated Carbide Ball End Mills may have Good Result for the Machining of Non-Ferrous Metals and Non-Metallic Materials.