YG-1 Cutting Tools

YG-1 EM899030 EM899 X-POWER Ball Nose Center Cut High Performance Medium Length Metric End Mill With Neck, 3 mm Dia Cutter, 8 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 70 mm OAL, AlTiN Coated

YG1 EM899030
$75.53 / EA
  • Mill Diameter: 3 mm
  • Mill Diameter - Decimal: 0.1181 in
  • Mill Diameter - Metric: 3 mm
  • Number of Flutes: 2
  • Length of Cut: 8 mm
  • Material: Carbide
  • Overall Length: 70 mm
  • Shank Diameter: 6 mm
  • Shank Diameter - Decimal: 0.2362 in
  • Shank Diameter - Metric: 6 mm
  • Finish/Coating: AlTiN
  • Single or Double End: Single End
  • Helix Angle: 30 deg
  • Centercutting: Center Cutting
  • Coolant Through: No
  • Cutting Direction: Right Hand
  • Diameter: 0.197 in
  • Diameter - Decimal: 0.197 in
  • Length of Cut - Decimal: 0.315 in
  • Length of Cut - Metric: 8 mm
  • Overall Length - Metric: 70 mm
  • Flute Direction: Right Hand

Yg-1 End Mill, Ball Nose Center Cut High Performance Medium Length Metric, Series: Em899 X-Power, 3 Mm Cutter Dia, 70 Mm Overall Length, 8 Mm Length Of Cut, 2 Flutes, Spiral Flute, 6 Mm Shank Dia, Right Hand Cutting, 30 Deg Helix Angle, Plain Shank, Micrograin Carbide, Altin Coatedcutter Diameter : 3 Mmcutting Direction : Right Handfinish : Altin Coatedflute Type : Spiralhelix Angle : 30 Deglength Of Cut : 8 Mmmaterial : Micrograin Carbidemaximum Depth Of Cut : 8 Mmnumber Of Flutes : 2Overall Length : 70 Mmseries : Em899 X-Powershank Diameter : 6 Mmshank Type : Plaintype : Ball Nose Center Cut High Performance Medium Length Metric Catalogdeep Slotting Milling Is Possible By Reduced Neckhigh Efficiency Milling Is Possible In Deep Slotting With Projection Of The End Mill Being Long//View All Branch Availabilitybranch Name Availablecontact A Quality Mill Representative© 2021 Quality Mill Supply. All Rights Reservedprivacy Policyterms Of Usesitemapshopabrasivescutting Toolshand Toolsmeasurementmrosafetyservicesgauging & Metrologyintegrated Supplyinventory Managementprocess Improvementworkplace Safetytrainingcompanyline Cardaffiliationsour Teamfaqcareerscontact Uscontact Usfranklin, In (Hq)2159 Early Lane,Franklin, In 46131 Mapph: (317) 489-0600Fx: (317) [email protected] Site Is Protected By Trustwave'S Trusted Commerce Program

  • Deep Slotting Milling Is Possible By Reduced Neck
  • High Efficiency Milling Is Possible In Deep Slotting With Projection Of The End Mill Being Long

Yg-1 Cutting Tools Em899030 3.0000 Mm Cut Dia | 6.0000 Mm Shank Dia | 70.0000 Mm Oal | Plain | Indexable Ball Nose End Mill

QTY