YG-1 X-POWER PRO GM109002 Series EM109 High Performance Stub Cut Length Ball Nose End Mill, 1/32 in Dia Cutter, 1/32 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2 in OAL, Y-Coated
YG1 GM109002
$124.45
/ EA
- Mill Diameter: 0.79 mm
- Mill Diameter - Decimal: 0.0313 in
- Mill Diameter - Fractional: 1/32 in
- Mill Diameter - Metric: 0.79 mm
- Number of Flutes: 2
- Length of Cut: 0.79 mm
- Material: Carbide
- Overall Length: 2 in
- Shank Diameter: 0.25 in
- Shank Diameter - Decimal: 0.25 in
- Shank Diameter - Fractional: 1/4 in
- Shank Diameter - Metric: 6.35 mm
- Finish/Coating: Y-Coating
- Single or Double End: Single End
- Helix Angle: 15 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutting Direction: Right Hand
- Length of Cut - Decimal: 0.0313 in
- Length of Cut - Fractional: 1/32 in
- Length of Cut - Metric: 0.79 mm
- Nose Radius: 1/64 in
- Overall Length - Decimal: 2 in
- Overall Length - Metric: 50.8 mm
- Flute Direction: Right Hand
2 Flute 15 Degree Helix Stub Cut Length Ball Nose X-Power Pro
- Deep Slotting Milling Is Possible By Reduced Neck
- High Efficiency Milling Is Possible In Deep Slotting With Projection Of End Mill Being Long.
Yg-1 Cutting Tools Gm109002 Mill Diameter 1/32 In | Number Of Flutes 2 | Length Of Cut 1/32 In | Solid Carbide | 2.0000 In | Ball End Mill