Royal 10693 High Speed Precision, Tapered Shank, #3 Morse Taper Taper, 830 lb, 180 lb Maximum Workpiece

• The Royal high speed precision live center is a true high speed live center with up to 12000 rpm
• The royal high speed precision live center is lubricated with lightweight spindle oil instead of grease for reduced turning resistance and lower operating temperatures
• The extended point of the Royal high speed precision live center, available in both steel and carbide tipped versions, has been optimized to provide high rigidity and outstanding tool clearance
• The Royal high speed precision live center is extremely accurate, with runout guaranteed to +/- 0.00005 in TIR or better
• Bearing life is significantly extended with the exclusive royal roto-shield coolant slinger and upgraded, long life, spring loaded seal that is resistant to abrasion, high temperatures and virtually all metalworking fluids
• This live center model incorporates three precision angular contact bearings that are secured to the point with a locknut to form a rigid preloaded assembly, this design is similar to a machine tool spindle cartridge and provides outstanding accuracy and rigidity
• The point of the Royal high speed precision live center extends into the center's body where it is supported by a needle roller bearing, this further increases rigidity, reduces point deflection and dampens vibration
• The low profile head of the Royal high speed precision live center offers exceptional tool clearance
• Both the point and body of this live center model are hardened and ground for strength and extended operating life
• Made with Roto-Shield™ technology

Standards/Approvals: UL Listed, ISO 9001:2008 Certified

For precision turning, grinding and hard-turning

Royal Live Center | High Speed Precision | Tapered Shank | #3 Morse Taper Taper | 180 lb Maximum Workpiece Weight | Long Point | 0.88 in Point Dia | 1-3/4 in Point Length | 830 lb | 1.7 in Head Dia | 2.12 in Head Length | 7-23/32 in Overall Length | 12000 rpm Maximum | 60 deg Included Angle | Triple Bearing | Carbide Tip/Steel | +/-0.00005 in TIR Accuracy