Seco Feedmax™ 34999 SD205A-M Single Diameter Jobber Length Drill, Metric, 4.9 mm Dia, 82 mm OAL, Solid Carbide, PVD-TiN+TiAlN Coated
- Drill Bit Size: 0.1929 in
- Drill Bit Size - Metric: 4.9 mm
- Point Angle: 140 deg
- Material: Solid Carbide
- Flute Type: Spiral
- Cutting Direction: Right Hand
- Shank Type: Cylindrical
- Coolant Through: Yes
- Cutting Depth: 5xD
- Enable Master ID: 821484
- Finish/Coating: PVD-TiN+TiAlN Coated
- Flute Length: 44 in
- Flute Length - Metric: 44
- Number of Flutes: 2
- Overall Length - Metric: 82 mm
- Point Type: Self-Centering
- Shank Size: 6 mm Dia x 36 mm L
- Taxonomy Level 1: Holemaking
Seco Feedmax™ solid carbide drills combine state-of-the-art carbide, coating and geometry technology into a unique high performance tool. The self-centering geometry provides high hole quality with no need for center drilling operations. A special TiAlN coating gives Seco Feedmax™ drills high hot hardness that, combined with a strong cutting edge, ensures long and predictable tool life. Seco Feedmax™ drills feature high strength carbide rods to minimize the risk of breakage and a low friction coating (TiAlN) for excellent chip evacuation. A protective corner chamfer further enhances application security.
- Seco Feedmax™ is designed for high productivity and low cost per hole with high feeds up to 0,70 mm/rev and high cutting speeds up to 220 m/min
- With excellent centering capabilities - high hole quality is achieved with no need for center drilling operations
- Thanks to the modern coating with high hot hardness, the strong cutting edges with protective corner chamfers, high strength carbide rod, excellent chip evacuation capabilities and a superb cutting edge quality - a long and predictable tool life is achieved
- Seco Feedmax™ has a wide range of optimized geometries for different materials and applications, to obtain a good quality hole at the lowest cost
- High feeds and cutting speeds
- Close tolerance holes
Standard/Approvals: DIN 6537A
For cutting and machining
Seco Feedmax Jobber Length Drill | Single Diameter | Series: SD205A-M | Metric | 4.9 mm Dia | 82 mm Overall Length | 5XD Cutting Depth | 2 Flutes | Spiral Flute | 44 mm Flute Length | 6 mm Dia x 36 mm L Shank | Cylindrical Shank | 140 deg Point | Self-Centering Point | Right Hand Cutting | Solid Carbide Cutting Edge | Through Coolant: Yes | Solid Carbide | PVD-TiN+TiAlN Coated | Applicable Materials: Superalloy