Seco Feedmax™ 53831 SD265A Shank Drill, 12.009 mm Dia, 118 mm OAL, Solid Carbide, Specs Met: DIN 6537A
- Drill Bit Size: 0.4727 in
- Drill Bit Size - Metric: 12.009 mm
- Point Angle: 140 deg
- Material: Solid Carbide
- Shank Type: Cylindrical
- Coolant Through: Yes
- Cutting Depth: 5xD
- Cutting Direction: Right Hand
- Finish/Coating: PVD/TiAlN/TiN Coated
- Flute Length: 71 in
- Flute Length - Metric: 71
- Number of Flutes: 2
- Overall Length - Metric: 118 mm
- Point Type: Self-Centering
- Shank Size: 12 mm Dia x 45 mm L
- Specifications Met: DIN 6537A
- Taxonomy Level 1: Holemaking
- Flute Type: Spiral
To generate a hole in IT7 quality with ordinary tools requires a drill and a reamer applied in a sequence of operations. With an optimized drill geometry and a total of 6-land margins, Seco Feedmax™ SD265A drills IT7 holes in one single pass and saves both cycle time and cost.
- Spiral flutes are constructed of a higher flute angle to remove chips easier
- High productivity and low cost per hole
- High hole quality with no need for center drilling operations
- High hot hardness with special TiAlN coating
- Strong cutting edge
- High cutting edge quality
- High strength carbide rod minimizes risk for breakages
- Low friction coating (TiAlN) for improved chip evacuation
- Protective corner chamfer
- Possible to regrind
Standard/Approvals: DIN 6537A
Holemaking Applications
Seco Feedmax Shank Drill | Series: SD265A | 12.009 mm Dia | 118 mm Overall Length | 5XD Cutting Depth | 2 Flutes | Spiral Flute | 71 mm Flute Length | 12 mm Dia x 45 mm L Shank | Cylindrical Shank | 140 deg Point | Self-Centering Point | Right Hand Cutting | Solid Carbide Cutting Edge | Solid Carbide Material | PVD/TiAlN/TiN Coated | Applicable Materials: Cast Iron | Plastic and Non-Ferrous Metals | DIN 6537A Specs Met | Yes Through Coolant