Seco 02754841 Turning Insert, ANSI Code: DCMT21.51-F1 TP1030, DCMT Insert, Material Grade: P, 070204 Insert, Diamond Shape, 07 Seat, Positive Rake, Neutral Cutting, For Use On Steel, Carbide, Manufacturer's Grade: TP1030
SECO 02754841
$15.27
/ Order multiples of 10 EA
Out of Stock
- Finish/Coating: Cermet-TiAlSiN Coated
- Insert Style: DCMT
- Insert Size: 070204
- Material: Carbide
- Length: 7.8 mm
- Thickness: 2.38 in
- Corner Radius: 0.4 in
- Manufacturer's Grade: TP1030
- Chipbreaker: F1
- Cutting Direction: Neutral
- Finish: Cermet
- Hole Diameter - Decimal: 0.11417 in
- Hole Diameter - Metric: 2.9 mm
- Included Angle: 55 deg
- Inscribed Circle - Metric: 6.4 mm
- Inscribed Circle Size: 6.35 mm
- Material Grade: P
- Maximum Depth of Cut: 2.75 in
- Rake: Positive
- Relief Angle: 7 deg
- Seat Size: 07
- Shape: Diamond
- Type: Basic Shape;Positive
- Width: 7.8 mm
- T9325 grade functionally gradient substrate
- Relatively low content of cobalt binder phase
- Thick MT-CVD coating
- Highly versatile material with very good operational reliability
- Special surface finish for coating
- Medium and higher cutting speed
- Continuous and interrupted cut
- Unfavorable cutting conditions, continuous and/or interrupted cuts
- Cutting geometry suitable for grooving and axial turning
- Suitable for turning, with an indexing accuracy to ISO tolerance class-M and chipbreakers on one side only
Finishing Applications
Seco Turning Insert | DCMT Insert | 070204 Insert | Diamond Shape | 2.75 mm Maximum Depth of Cut | 6.4 mm Inscribed Circle | 2.38 mm Thickness | 07 Seat | Positive Rake | F1 Chipbreaker | 0.4 mm Corner Radius | 2.9 mm Diameter Hole | Manufacturer's Grade: TP1030 | ANSI Code: DCMT21.51-F1 TP1030 | ISO Code: DCMT070204-F1 TP1030 | 55 deg Included Angle | 7 deg Relief Angle | Neutral Cutting Direction | Carbide | Cermet-TiAlSiN Coated | Material Grade: P | For Use On: Steel