Emuge 1926A.0750 Square End Mills 3/4in Milling Dia, 1-1/2in LOC, 4in OAL, 4 Flutes, Carbide
EMUGE 1926A.0750
$403.61
/ EA
Out of Stock
- Mill Diameter: 0.75 in
- Mill Diameter - Decimal: 0.75 in
- Mill Diameter - Fractional: 3/4 in
- Mill Diameter - Metric: 19.05 mm
- Number of Flutes: 4
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 1.5 in
- Shank Diameter: 0.75 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Overall Length: 4 in
- Centercutting: Center Cutting
- Helix Angle: 50 deg
- Coolant Through: No
- Cutter Diameter: 3/4 in
- Cutting Direction: Right Hand
- Extended Reach: Yes
- Flute Direction: Right Hand
- Flute Type: Spiral
- Length of Cut - Decimal: 1.5 in
- Length of Cut - Fractional: 1-1/2 in
- Length of Cut - Metric: 38.1 mm
- Overall Length - Decimal: 4 in
- Overall Length - Metric: 101.6 mm
- Series: Jet-Cut 1926A
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Cutter Diameter - Fractional: 3/4 in
- Jet-Cut carbide end mills are designed to mill a wide range of materials with high performance milling feed rates
- Vibration dampening variable flute spacing
- Series 1926A cutting face rake angle +10 deg for roughing/finishing up to 50 Rc
- For use in steels, copper alloys, cast iron and hardened steels
- Tighter manufacturing tolerances on cutting diameter
- TiAlN coated for heat and wear resistance
- High metal removal rate combined with the best possible surface quality
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For finishing applications
Emuge Square End Mill | Long Length | Series: Jet-Cut 1926A | 3/4 in Cutter Dia | 4 in Overall Length | 1-1/2 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 50 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated