Emuge 2649Tz.0625 Square End Mills 5/8in Milling Dia, 1-1/4in LOC, 3-1/2in OAL, 4 Flutes, Carbide
EMUGE 2649TZ.0625
$272.38
/ EA
Out of Stock
- Mill Diameter: 0.625 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.875 mm
- Number of Flutes: 4
- Material: Carbide
- Finish/Coating: TiN / TiAlN
- Length of Cut: 1.25 in
- Shank Diameter: 0.625 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Overall Length: 3.5 in
- Centercutting: No Center Cutting
- Helix Angle: 45 deg
- Coolant Through: Yes
- Cutter Diameter: 5/8 in
- Cutter Diameter - Fractional: 5/8 in
- Cutting Direction: Right Hand
- Diameter: 5/8 in
- Diameter - Fractional: 5/8 in
- Diameter - Metric: 15.87 mm
- Extended Reach: Yes
- Finish: TiN/TiAlN
- Flute Direction: Right Hand
- Length of Cut - Decimal: 1.25 in
- Length of Cut - Fractional: 1-1/4 in
- Length of Cut - Metric: 31.75 mm
- Length Type: Long Length
- Overall Length - Decimal: 3.5 in
- Overall Length - Fractional: 3-1/2 in
- Overall Length - Metric: 88.9 mm
- Series: TiNox-Cut 2649TZ
- Single or Double End: Single End
- Type: TiNox-Cut
- Flute Type: Spiral
- Diameter - Decimal: 0.625 in
- Shank Type: Weldon Flat
- The TiNox-Cut series was especially developed for machining titanium alloys and nickel based alloys along with stainless steel
- Vibration dampening with variable flute spacing
- Heat and wear resistant multi-layer TiN/TiAlN - PVD coating
- Semi-finishing roughing flute profile for optimum performance
- Coolant fed (axial) design for efficient chip evacuation
- Tool shanks are held to h5 tolerance and have a roughened surface (non-polished) for greater gripping force
- Machining of difficult to cut materials
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For roughing and finishing applications
Emuge Square End Mill | Standard Length | Series: TiNox-Cut 2649TZ | 5/8 in Cutter Dia | 3-1/2 in Overall Length | 1-1/4 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Weld-On Flat Shank | Carbide | TiN/TiAlN Coated