Emuge 2875A.0500 Square End Mills 1/2in Milling Dia, 3/4in LOC, 3-3/4in OAL, 3 Flutes, Carbide
EMUGE 2875A.0500
$257.90
/ EA
Out of Stock
- Mill Diameter: 0.5 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Number of Flutes: 4
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 0.75 in
- Shank Diameter: 0.5 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 3.75 in
- Centercutting: Center Cutting
- Helix Angle: 45 deg
- Coolant Through: No
- Cutter Diameter: 1/2 in
- Cutter Diameter - Fractional: 1/2 in
- Cutting Direction: Right Hand
- Diameter: 1/2 in
- Extended Reach: Yes
- Finish: TiAlN Coated
- Flute Type: Spiral
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Length Type: Extra Long Length
- Overall Length - Decimal: 3.75 in
- Overall Length - Fractional: 3-3/4 in
- Overall Length - Metric: 95.25 mm
- Series: Multi-Cut 2875A
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Type: High Performance
- Diameter - Fractional: 1/2 in
- Diameter - Metric: 12.7 mm
- Diameter - Decimal: 0.5 in
- Flute Direction: Right Hand
- Vibration dampening variable flute spacing
- Short flute length with an aggressive 45 deg helix angle
- NR fine roughing flute profile helps reduce vibrations and cutting force for optimum performance
- PVD applied TiAlN coated for wear and heat resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For high performance roughing operations and maximum metal removal rates
Emuge Square End Mill | Extra Length | Series: Multi-Cut 2875A | 1/2 in Cutter Dia | 3-3/4 in Overall Length | 3/4 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated