Emuge 2887A.0375 Square End Mills 3/8in Milling Dia, 7/8in LOC, 2-3/4in OAL, 10 Flutes, Carbide
EMUGE 2887A.0375
$202.05
/ EA
Out of Stock
- Mill Diameter: 0.375 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Number of Flutes: 10
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 0.875 in
- Shank Diameter: 0.375 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Overall Length: 2.75 in
- Centercutting: No Center Cutting
- Helix Angle: 40 deg
- Coolant Through: No
- Cutter Diameter: 3/8 in
- Cutting Direction: Right Hand
- Extended Reach: Yes
- Flute Direction: Right Hand
- Flute Type: Spiral
- Length of Cut - Decimal: 0.875 in
- Length of Cut - Fractional: 7/8 in
- Length of Cut - Metric: 22.22 mm
- Overall Length - Decimal: 2.75 in
- Overall Length - Fractional: 2-3/4 in
- Overall Length - Metric: 69.85 mm
- Series: Jet-Cut 2887A
- Shank Type: Cylindrical
- Single or Double End: Single End
- Cutter Diameter - Fractional: 3/8 in
- Jet-Cut/hard metal carbide end mills are designed to mill hardened materials (44 -66 Rc)
- High metal removal rate combined with the best possible surface quality
- From 6 to 20 flute options for reduced vibration cutting
- Tighter manufacturing tolerances on cutting diameter
- TiAlN coated for heat and wear resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For finishing applications
Emuge Square End Mill | Multi-Tooth | Series: Jet-Cut 2887A | 3/8 in Cutter Dia | 2-3/4 in Overall Length | 7/8 in Maximum Depth of Cut | 10 Flutes | Spiral Flute | 3/8 in Shank Dia | Right Hand Cutting | 40 deg Helix Angle | Cylindrical Shank | Carbide | TiAlN Coated