KENNAM 4046273 0.4724 in Milling Dia, 1.0236 in LOC, 3.2677 in OAL, 4 Flutes, Carbide, AlTiN, Roughing & Finishing End Mills

Kennametal’s HARVI I™ high performance solid carbide end mills are designed for roughing and finishing with one tool on almost all materials. HARVI I offers plunging, slotting, and profiling at high feed rates for a wide range of materials. They are designed to provide maximum Metal Removal Rates (MRR) and to achieve superior surface conditions.

• HARVI I
• F4AS...DL
• Unequal Flute Spacing
• Single tool for roughing and finishing applications
• Unequal flute spacing minimises chatter for smoother machining
• Centre cutting
• Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials
• Aluminum titanium nitride (AlTiN) is one ofthe most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel
• Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping
• Designed for stainless steels, carbon steels, hardened steels and other difficult-to-machine materials
• Outstanding metal removal rates increase productivity
• Unequally spaced flutes for chatter-free machining for smoother machining at high feed rates
• Centercutting design for higher flexibility as well as radial and axial finishing pass after roughing operation
• Proprietary KCPM15 Beyond grade for outstanding wear protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear

Standard/Approvals: KCPM15, F4AS1200ADL38

Application: Plunge Milling, Ramping: Blank, Slotting: Square End, Side Milling/Shoulder Milling: Square End, Corner Style: Corner Chamfer, Helix Angle: 38°, Tool Dimensions: Flute Configuration: 4, Trochoidal Milling

Kennametal 14046273 0.4724 in Dia | 4 Flute | 38 Degree | Solid Carbide | 0.0500 in | Roughing & Finishing End Mill