KENNAM 6115656 1.5000 in Milling Dia, 6.0000 in LOC, 10.0000 in OAL, 6 Flutes, Carbide, AlTiN, Roughing & Finishing End Mills
KENNAM 6115656
$1,641.12
/ EA
Out of Stock
- Mill Diameter: 1.5 in
- Mill Diameter - Decimal: 1.5 in
- Mill Diameter - Fractional: 1-1/2 in
- Mill Diameter - Metric: 38.1 mm
- Corner Radius: 0.25 in
- Number of Flutes: 6
- Material: Carbide
- Finish/Coating: AlTiN
- Length of Cut: 6 in
- Shank Diameter: 1.5 in
- Shank Diameter - Decimal: 1.5 in
- Shank Diameter - Fractional: 1-1/2 in
- Shank Diameter - Metric: 38.1 mm
- Overall Length: 10 in
- Centercutting: Center Cutting
- Helix Angle: 38 deg
- Center Cutting: Yes
- Corner Radius - Metric: 6.35 mm
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- End Type: Corner Radius
- Hand of Tool: R - Right
- Length of Cut - Decimal: 6 in
- Length of Cut - Metric: 152.4 mm
- Overall Length - Decimal: 10 in
- Overall Length - Metric: 254 mm
- Shank Length: 2.875 in
- Shank Type: Round
- Flute Direction: Right Hand
- HARVI III™
- UJDE
- Unequal Flute Spacing
- With Eccentric Relief Grind
- Kennametal standard dimensions
- Center cutting
- Optimized geometry for titanium machining
- Unequal flute spacing minimizes chatter for smoother machining
- Single tool for both roughing and finishing operations requiring fewer setups
- High-performance roughing and finishing tool preferred by TOP AEROSPACE COMPANIES
- Center cutting for expanded ramping capabilities
- Optimized geometry for titanium machining
- Unequal flute spacing minimizes chatter for smoother machining
- SAFE-λOCK™ Shank prevents end mill pullout, enabling higher feed rates
Standard/Approvals: KCSM15, UJDE1500N6HBF
Application: Trochoidal Milling, Ramping: Blank, Side Milling/Shoulder Milling: Square End, Corner Style: Corner Radius, Helix Angle: 38°, Tool Dimensions: Flute Configuration: 6
Kennametal 16115656 1.5000 in Dia | 6 Flute | 38 Degree | Carbide | Roughing & Finishing End Mill