Niagara Cutter N44559 REM445 Medium Length Non-Center Cutting Single End Mill, 1-1/4 in Dia Cutter, 0.04 in Corner Radius, 3 in Max Depth of Cut, 6 Flutes, 1-1/4 in Dia Shank, 5-1/2 in OAL
NIACUT 17010415
$202.80
/ EA
Out of Stock
- Corner Radius: 0.04 in
- Number of Flutes: 6
- Material: M42 HSS-Co 8
- Finish/Coating: Uncoated
- Length of Cut: 3 in
- Shank Diameter - Decimal: 1.25 in
- Shank Diameter - Fractional: 1-1/4 in
- Shank Diameter - Metric: 31.75 mm
- Overall Length: 5-1/2 in
- Cutting Direction: Right Hand
- Helix Angle: 30 deg
- Chamfer Angle: 45 deg
- Cutter Diameter - Fractional: 1-1/4 in
- Diameter - Fractional: 1-1/4 in
- End Type: Square
- Flute Type: Spiral
- Overall Length - Fractional: 5-1/2 in
- Pitch: Fine
- Series: REM445
- Taxonomy Level 1: Cutting Tools
- Type: Non-Center Cutting
- Diameter - Decimal: 1.25 in
- Shank Type: Weldon Flat
- Diameter - Metric: 31.75 mm
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Medium Length Non-Center Cutting Single End | Series: REM445 | 1-1/4 in Cutter Dia | 0.04 in Corner Radius | 5-1/2 in Overall Length | 3 in Maximum Depth of Cut | 6 Flutes | Spiral Flute | 1-1/4 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM445-1.250-D3-C040.3-Z6 | ISO Code: REM4451.250D3C040.3Z6 | M42 HSS-Co 8 | Uncoated