OSG 1661200 101L General Purpose Straight Flute Hand Tap, Left Hand Cutting, 3/8-24 Thread, H3 Thread Limit, 1.5P-2P Bottoming Chamfer, 4 Flutes, Bright, HSS
- Coolant Through: No
- Thread Size: 3/8-24
- Material: HSS
- Finish/Coating: Bright
- Number of Flutes: 4
- Thread Limit: H3
- Chamfer Type: 1.5P-2P Bottoming
- Flute Type: Straight
- Material Application: Ferrous and Non-Ferrous Metals
- Measurement System: Imperial
- Overall Length: 2.937 in
- Overall Length - Decimal: 2.93 mm
- Series: 101L
- Shank Diameter - Decimal: 0.38 in
- Thread Length: 0.937 in
- Thread Standard: UNS
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Straight flute taps are designed for short chipping materials
- HSS material increased wear-resistance
- Bright surface treatment increases mechanical lubricity
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For blind and through hole applications
OSG Straight Flute Hand Tap | General Purpose | Series: 101L | Measurement System: Imperial | UNS | 3/8-24 | 1.5P-2P Bottoming Chamfer | 4 Flutes | HSS | Bright | Left Hand Cutting | 0.937 in Thread Length | 2.93 in Overall Length | 0.38 in Shank Dia | Ferrous and Non-Ferrous Metals Material Application | H3 Thread Limit | No Through Coolant (Yes/No)