ALLIED #0 TA PC TIALN 19/32" Premium Cobalt Replaceable Drill Insert

Original T-A® is an excellent choice for general purpose use. The design provides fast penetration rates that produce good hole size and finish. Standard geometry combines highly efficient and stable cutting action to minimize power consumption. Recommended for use in most steels, cast irons, high temperature alloys and aluminum alloys. Drill insert systems set the standard for replaceable insert technology, delivering consistent performance and reduced cost per hole, increased productivity and outstanding tool life.

• HSS premium cobalt is particularly suited for rigid machining applications primarily used for drilling exotic and high alloy materials, or general use when the M/min surface speed needs to be increased
• For use in material hardness up to 400 BHN 139 kg
• TiAlN - Excellent choice for wear resistance over high surface speeds
• Excellent oxidation resistance
• 800 deg C maximum working temperature
• HV 3000 hardness
• Violet/gray color
• Standard Geometry - Offers excellent penetration rates and tool life
• Smooth break-out on through holes, drill stability and excellent chip formation characteristics
• Particularly suited for low to high rigidity machining applications
• Through coolant optimizes chip evacuation and improved tool performance
• Corner clip allows for effective heat dispersion and increased tool life
• Ground back location ensures accurate positioning
• Self-centering point eliminates center drilling
• Web thin reduces thrust and increases point strength allowing greater reliability
• Eliminates the need for re-sharpening

AME® Original T-A® Spade Drill Insert | Replaceable | Series: 0 Series | 19/32 in Drill | 1/8 in Thickness | Standard | 132 deg Included Angle | 0 Seat | HSS Premium Cobalt | TiAlN Coated

For general purpose application