Emuge 1828A.0625 Square End Mills 5/8in Milling Dia, 2in LOC, 4-1/4in OAL, 8 Flutes, Carbide
EMUGE 1828A.0625
$488.19
/ EA
Out of Stock
- Mill Diameter: 0.625 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.875 mm
- Chamfer Length: 0.007 in
- Number of Flutes: 8
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 2 in
- Shank Diameter: 0.625 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Overall Length: 4.25 in
- Centercutting: No Center Cutting
- Helix Angle: 50 deg
- Coolant Through: No
- Cutter Diameter: 5/8 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Diameter - Metric: 15.87 mm
- End Type: Square
- Extended Reach: No
- Flute Direction: Right Hand
- Length of Cut - Decimal: 2 in
- Length of Cut - Metric: 50.8 mm
- Length Type: Long Length
- Overall Length - Decimal: 4.25 in
- Overall Length - Fractional: 4-1/4 in
- Overall Length - Metric: 107.95 mm
- Series: Hard-Cut 1828A
- Shank Type: Cylindrical
- Single or Double End: Single End
- Type: Hard Cut
- Flute Type: Spiral
- Cutter Diameter - Fractional: 5/8 in
- Diameter - Fractional: 5/8 in
- Hard-Cut series of carbide end mills is specifically developed for machining hardened materials (up to 66 Rc)
- Well suited for the die and mold industry and are manufactured with extremely tight tolerances
- Multi-flute - 6, 8 and 10 flute construction for hard milling
- Premium sub-micro grain carbide substrate
- TiAlN coated for heat and wear resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For roughing applications
Emuge Square End Mill | Extra Length | Series: Hard-Cut 1828A | 5/8 in Cutter Dia | 4-1/4 in Overall Length | 2 in Maximum Depth of Cut | 8 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 50 deg Helix Angle | Cylindrical Shank | Carbide | TiAlN Coated