Emuge 1926A.0500 Square End Mills 1/2in Milling Dia, 1in LOC, 3in OAL, 4 Flutes, Carbide
EMUGE 1926A.0500
$230.80
/ EA
Out of Stock
- Mill Diameter: 0.5 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Number of Flutes: 4
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 1 in
- Shank Diameter: 0.5 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 3 in
- Centercutting: Center Cutting
- Helix Angle: 50 deg
- Coolant Through: No
- Cutter Diameter: 1/2 in
- Cutter Diameter - Fractional: 1/2 in
- Cutting Direction: Right Hand
- Extended Reach: Yes
- Flute Direction: Right Hand
- Length of Cut - Decimal: 1 in
- Length of Cut - Metric: 25.4 mm
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: Jet-Cut 1926A
- Single or Double End: Single End
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Jet-Cut carbide end mills are designed to mill a wide range of materials with high performance milling feed rates
- Vibration dampening variable flute spacing
- Series 1926A cutting face rake angle +10 deg for roughing/finishing up to 50 Rc
- For use in steels, copper alloys, cast iron and hardened steels
- Tighter manufacturing tolerances on cutting diameter
- TiAlN coated for heat and wear resistance
- High metal removal rate combined with the best possible surface quality
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For finishing applications
Emuge Square End Mill | Long Length | Series: Jet-Cut 1926A | 1/2 in Cutter Dia | 3 in Overall Length | 1 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 50 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated