Emuge 2573L.0750 Square End Mills 3/4in Milling Dia, 3XD LOC, 5in OAL, 5 Flutes, Carbide
EMUGE 2573L.0750
$567.74
/ EA
Out of Stock
- Mill Diameter: 0.75 in
- Mill Diameter - Decimal: 0.75 in
- Mill Diameter - Fractional: 3/4 in
- Number of Flutes: 5
- Length of Cut: 2.25 in
- Material: Carbide
- Shank Diameter: 0.75 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Single or Double End: Single End
- Overall Length: 5 in
- Flute Direction: Right Hand
- Cutting Direction: Right Hand
- Helix Angle: 38 - 42 deg
- Coolant Through: No
- Cutter Diameter: 3/4 in
- Cutter Diameter - Fractional: 3/4 in
- Length of Cut - Fractional: 2-1/4 in
- Overall Length - Decimal: 5 in
- Series: Trochoidal Jet-Cut 2573L
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Trochoidal Jet-Cut series was especially developed for use with advanced milling strategies in machining steels and cast materials
- Vibration dampening with variable helix/flute spacing
- Heat and wear resistant mono-layer AlCr - PVD applied coating
- Roughing/finishing flute profile for optimum performance
- Staggered chip breaker design for even wear in depths up to 3XD
- High metal removal rate combined with the best possible surface quality
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For roughing and finishing applications
Emuge Square End Mill | Series: Trochoidal Jet-Cut 2573L | 3/4 in Cutter Dia | 5 in Overall Length | 3XD Maximum Depth of Cut | 5 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 38/42 deg Helix Angle | Weld-On Flat Shank | Carbide | AlCr Coated