Emuge 2869A.0125 Square End Mills 1/8in Milling Dia, 3/16in LOC, 2-1/2in OAL, 3 Flutes, Carbide
EMUGE 2869A.0125
$195.10
/ EA
Out of Stock
- Mill Diameter: 0.125 in
- Mill Diameter - Decimal: 0.125 in
- Mill Diameter - Fractional: 1/8 in
- Mill Diameter - Metric: 3.175 mm
- Number of Flutes: 3
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 0.1875 in
- Shank Diameter: 0.125 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Overall Length: 2.5 in
- Centercutting: Center Cutting
- Helix Angle: 45 deg
- Coolant Through: No
- Cutter Diameter: 1/8 in
- Cutting Direction: Right Hand
- Diameter: 1/8 in
- Extended Reach: Yes
- Finish: TiAlN Coated
- Flute Direction: Right Hand
- Length of Cut - Decimal: 0.1875 in
- Length of Cut - Fractional: 3/16 in
- Length of Cut - Metric: 4.7625 mm
- Length Type: Long Length
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
- Series: Multi-Cut 2869A
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/8 in
- Diameter - Fractional: 1/8 in
- Diameter - Decimal: 0.125 in
- Type: High Performance
- Diameter - Metric: 3.175 mm
- Vibration dampening variable flute spacing
- Series 2869A for most materials up to 50 Rc
- Short flute with aggressive 45 deg helix angle
- NR course roughing flute profile helps reduce vibrations and cutting force for optimum performance
- PVD applied TiAlN coating for heat and wear resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For high performance roughing operations and maximum metal removal rates
Emuge Square End Mill | Standard Length | Series: Multi-Cut 2869A | 1/8 in Cutter Dia | 2-1/2 in Overall Length | 3/16 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 1/8 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated