Emuge 2869Az.0625 Square End Mills 5/8in Milling Dia, 7/8in LOC, 3-1/2in OAL, 3 Flutes, Carbide
EMUGE 2869AZ.0625
$449.79
/ EA
Out of Stock
- Mill Diameter: 0.625 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.875 mm
- Number of Flutes: 4
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 0.9375 in
- Shank Diameter: 0.625 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Overall Length: 3.5 in
- Centercutting: Center Cutting
- Helix Angle: 45 deg
- Coolant Through: No
- Cutter Diameter: 5/8 in
- Cutter Diameter - Fractional: 5/8 in
- Cutting Direction: Right Hand
- Diameter: 5/8 in
- Diameter - Fractional: 5/8 in
- Diameter - Metric: 15.87 mm
- Extended Reach: Yes
- Finish: TiAlN Coated
- Length of Cut - Decimal: 0.9375 in
- Length of Cut - Fractional: 15/16 in
- Length of Cut - Metric: 23.8125 mm
- Length Type: Long Length
- Overall Length - Decimal: 3.5 in
- Overall Length - Fractional: 3-1/2 in
- Overall Length - Metric: 88.9 mm
- Series: Multi-Cut 2869AZ
- Single or Double End: Single End
- Type: High Performance
- Flute Type: Spiral
- Diameter - Decimal: 0.625 in
- Shank Type: Weldon Flat
- Flute Direction: Right Hand
- Vibration dampening variable flute spacing
- Short flute length with an aggressive 45 deg helix angle
- NR fine roughing flute profile helps reduce vibrations and cutting force for optimum performance
- PVD applied TiAlN coated for wear and heat resistance
- Coolant fed (axial) construction
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For high performance roughing operations and maximum metal removal rates
Emuge Square End Mill | Standard Length | Series: Multi-Cut 2869AZ | 5/8 in Cutter Dia | 3-1/2 in Overall Length | 7/8 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated