Emuge 2873A.0375 Square End Mills 3/8in Milling Dia, 7/8in LOC, 2-3/4in OAL, 3 Flutes, Carbide
EMUGE 2873A.0375
$216.59
/ EA
Out of Stock
- Mill Diameter: 0.375 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Number of Flutes: 4
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 0.875 in
- Shank Diameter: 0.375 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Overall Length: 2.75 in
- Centercutting: Center Cutting
- Helix Angle: 45 deg
- Coolant Through: No
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Cutting Direction: Right Hand
- Extended Reach: Yes
- Length of Cut - Decimal: 0.875 in
- Length of Cut - Fractional: 7/8 in
- Length of Cut - Metric: 22.22 mm
- Overall Length - Decimal: 2.75 in
- Overall Length - Fractional: 2-3/4 in
- Overall Length - Metric: 69.85 mm
- Series: Multi-Cut 2873A
- Single or Double End: Single End
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Flute Direction: Right Hand
- Vibration dampening variable flute spacing
- NR fine roughing flute profile helps reduce vibrations and cutting force for optimum performance
- PVD applied TiAlN coated for wear and heat resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For high performance roughing operations and maximum metal removal rates
Emuge Square End Mill | Long Length | Series: Multi-Cut 2873A | 3/8 in Cutter Dia | 2-3/4 in Overall Length | 7/8 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 3/8 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated