KENNAM 6113106 0.0300 in Corner Rad, 0.5000 in Mill Dia, 2.0000 in LOC, 4.0000 in OAL, 6 Flutes, Carbide, AlTiN, Corner Radius & Corner Chamfer End Mill
KENNAM 6113106
$181.76
/ EA
Out of Stock
- Mill Diameter: 1/2 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Corner Radius: 0.03 in
- Number of Flutes: 6
- Material: Carbide
- Length of Cut: 2 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 4 in
- Helix Angle: 38 deg
- Variable Index: No
- Center Cutting: Center Cutting
- Centercutting: Center Cutting
- Chipbreaker: No
- Corner Radius - Decimal: 0.03 in
- End Type: Corner Radius
- Finish/Coating: AlTiN
- Flute Direction: Right Hand
- Hand of Tool: R - Right
- Length of Cut - Decimal: 2 in
- Length of Cut - Metric: 50.8 mm
- Material Grade: KCSM15
- Overall Length - Decimal: 4 in
- Overall Length - Metric: 101.6 mm
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings.
- Kennametal standard dimensions.
- Center cutting.
- Optimized geometry for titanium machining.
- Unequal flute spacing minimizes chatter for smoother machining.
- Single tool for both roughing and finishing operations requiring fewer setups.
Standard/Approvals: UJDE0500J6CBB, KCSM15
Application: • Trochoidal Milling• Ramping: Blank• Side Milling/Shoulder Milling: Square End• Corner Style: Corner Radius• Helix Angle: 38°• Tool Dimensions: Flute Configuration: 6. • Outstanding protection in milling stainless steel to mitigate crate, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
Kennametal 6113106 0.5000 in Dia | 6 Flute | Solid Carbide | 0.0300 in | AlTiN | Corner Radius & Corner Chamfer End Mill