Kennametal 6358971 0.0984 in Drill Bit Size, 0.6299 in Flute Length, 1.9685 in OAL, 2 Flutes, Carbide, Screw Machine Length Drill Bit
KENNAM 6358971
$89.57
/ EA
Out of Stock
- Drill Bit Size - Decimal: 0.0984 in
- Drill Bit Size - Metric: 2.5 mm
- Drill Bit Material: Carbide
- Shank Type: Straight
- Overall Length: 1.9685 in
- Drill Point Length: 0.0185 in
- Finish/Coating: AlTiSiN
- Flute Length: 0.6299 in
- Flute Type: Helical; Spiral
- Hand of Tool: R - Right
- Helix Angle: 15 deg
- Number of Flutes: 2
- Point Type: SGL Point
- Shank Diameter - Decimal: 0.1181 in
- Shank Diameter - Metric: 3 mm
- Shank Length: 1.1024 in
- The B94_ drill series without through coolant is specifically designed to machine hardened and surface hardened materials, using flood coolant. With its 145° point angle, it is also perfectly suited as pilot drill for the B95_ drill series with through coolant and 140° point for deeper applications.
- KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials. It avoids chipping on cutting edge thus pre-mature wear.
- Special flute design with strong web to increase the strength of the drill in tough applications with short chips.
- B94_ series with 15° helix angle to maximize stability in applications above 54 HRC.Grade KCH10 on B94_ series consists of a special fine grain carbide substrate with higher hardness. It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.
Standard/Approvals: KCH10, B941Z02500
Application: • Drilling• Shank - Cylindrical Plain ≤h6• Helix Angle: 15°• DIN number 6537• DIN number 6535• Tool Dimensions: 2flute/4margin/no cool• Drilling - No Coolant• Drilling: Stacked Plates• Corner style: corner chamfer• Flood coolant: drilling• DIN number 6535
Kennametal 6358971 0.0984 in | 142 Degree | 0.4700 in | Solid Carbide | High Performance | Screw Machine Length Drill Bit