
Kennametal 6359046 0.5118 in Drill Bit Size, 2.3600 in Flute Length, 4.2100 in OAL, 2 Flutes, Carbide, Screw Machine Length Drill Bit
KENNAM 6359046
$363.46
/ EA
Out of Stock
- Drill Bit Size - Decimal: 0.5118 in
- Drill Bit Size - Metric: 13 mm
- Drill Bit Material: Carbide
- Shank Type: Straight
- Overall Length: 4.21 in
- Drill Point Length: 0.1012 in
- Finish/Coating: AlTiN
- Flute Length: 2.36 in
- Flute Type: Helical; Spiral
- Hand of Tool: R - Right
- Helix Angle: 27.546 deg
- Number of Flutes: 2
- Point Type: SGL Point
- Shank Diameter - Decimal: 0.5512 in
- Shank Diameter - Metric: 14 mm
- Shank Length: 1.7717 in
- The all new KMH solid carbide drills are engineered for hard material applications up to 65 HRC.
- The B95_ drill series with through coolant and 140° point is designed for deeper applications.KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials.
- It avoids chipping on cutting edge thus pre-mature wear.Special flute design with strong web to increase the strength of the drill in tough applications with short chips.
- B95_ series with 30° helix angle to improve chip evacuation in higher length-to-diameter ratios.KCH15 on B95_ with its higher toughness supports edge strength at increased rake angles, which are applied to improve chip evacuation in higher L/D ratios.
- It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings.
Standard/Approvals: KCH15, B951A13000
Application: • Drilling• Shank - Cylindrical Plain ≤h6• Helix Angle: 30°• DIN number 6537• DIN number 6535• Tool Dimensions: 2flute/4margin/cool• Drilling: Stacked Plates• Corner style: corner chamfer• Drilling: Throgh coolant• Throgh coolant: MQL, Drilling : Cross hole Drilling
Kennametal 6359046 0.5118 in | 138 Degree | 0.1012 in | Solid Carbide | High Performance | Screw Machine Length Drill Bit