Mitutoyo 3058SB-19 3 Series Flat Back Large Dial Face Metric Dial Indicator, 50 mm, 0 to 100 Dial Reading, 0.01 mm, 78 mm Dial, M2.5x0.45 Tip

This is a standard, inch dial indicator. No through screw holes on the frame and secure adhesion between the bezel and the crystal as well as the use of an O-ring prevents water or oil penetration.

• Standard 0.01mm graduation dial gages
• having an outer frame with an outside
• diameter of 57mm. All types come with
• limit pins and an outer-frame clamp as
• standard
• The outer clamp and lifting lever (optional)
• can be attached to either the right or left
• side. These parts can be easily installed and
• removed without tools
• Secured adhesion between the outer frame
• and crystal, as well as the use of an O-ring,
• protect against water and oil permeation
• via the front face.The stem spindle is made of high-strength
• quench-hardened stainless steel for
• longevity
• A carbide contact point is used
• The grand gear uses stainless steel that is
• resistant to wear and deformation
• Application of a hard coating on the
• surface of the crystal makes the gage
• highly scratch- and chemical-resistant

Mitutoyo 3058SB-19 | 0.010 mm Dial Graduation | 1.00 mm Range Per Revolution | Dial Test Indicator