Niagara Cutter 03043577 SN200R High Feed Medium Length Non-Center Cutting Single End End Mill, 1/16 in Dia Cutter, 0.0074 in Corner Radius, 0.004 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2 in OAL, AlTiN Coated
NIACUT 03043577
$72.84
/ EA
Out of Stock
- Mill Diameter: 1/16 in
- Mill Diameter - Decimal: 0.0625 in
- Mill Diameter - Fractional: 1/16 in
- Mill Diameter - Metric: 1.5875 mm
- Corner Radius: 0.0074 in
- Number of Flutes: 2
- Material: Carbide
- Length of Cut: 0.004 in
- Shank Diameter: 1/4 in
- Shank Diameter - Decimal: 0.25 in
- Shank Diameter - Fractional: 1/4 in
- Shank Diameter - Metric: 6.35 mm
- Overall Length: 2 in
- Cutting Direction: Right Hand
- Helix Angle: 0 deg
- Centercutting: No Center Cutting
- Chipbreaker: No
- Corner Radius - Decimal: 0.0074 in
- Cutter Diameter: 1/16 in
- Cutter Diameter - Fractional: 1/16 in
- End Type: Corner Radius
- Finish: AlTiN/PVD
- Finish/Coating: AlTiN
- Flute Direction: Right Hand
- Length of Cut - Decimal: 0.004 in
- Length Type: Medium Length
- Overall Length - Decimal: 2 in
- Overall Length - Metric: 50.8 mm
- Series: SN200R
- Shank Type: Cylindrical
- Single or Double End: Single End
- Type: High Feed
- Flute Type: Spiral
- Solid carbide high feed tools excel in face, slot and plunge milling
- High feed capabilities yield significant productivity gains
- Reduced production costs when processing deep and shallow pockets
- Longer tool life than previous cutters when applied at the same table feed rates
- Low radial forces minimize vibration and machine wear
- Wide application area covered, from steel to exotic materials
- AlTiN coating for high heat and abrasion resistance
- Edge prep to increase cutting edge strength
- Multiple flutes and long tool overhang
- Axial directed cutting forces
- High heat and abrasion resistant
- Reduced cycle time, higher metal removal rates
- Deep cavity milling
- Smoother cutting in long reach applications
- Long and predictable tool life
Face Milling, Plunge Milling and Slotting
Niagara Cutter End Mill | High Feed Medium Length Non-Center Cutting Single End | Series: SN200R | 1/16 in Cutter Dia | 0.0074 in Corner Radius | 2 in Overall Length | 0.004 in Maximum Depth of Cut | 2 Flutes | Spiral Flute | 1/4 in Shank Dia | Right Hand Cutting | 0 deg Helix Angle | Cylindrical Shank | ANSI Code: SN200R-0.063-J3-H007.0-Z2 | ISO Code: SN200R.063J3H007.0Z2 | Solid Carbide | AlTiN Coated