Niagara Cutter 17014368 RTM713 Center Cutting Short Length Single End End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 7/8 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2-3/4 in OAL, Uncoated
NIACUT 17014368
$37.10
/ EA
Out of Stock
- Mill Diameter: 3/8 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Length of Cut: 7/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: HSS-Co8
- Finish/Coating: Bright / Uncoated
- Overall Length: 2-3/4 in
- Centercutting: Center Cutting
- Helix Angle: 36 deg
- Center Cutting: Center-cutting
- Chamfer Length: 0.02 in
- Chamfer Width: 0.02 in
- Chamfer Width - Decimal: 0.02 in
- Chipbreaker: No
- Corner Radius: 0.02 in
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Cutting Direction: Right Hand
- Extended Reach: No
- Length of Cut - Decimal: 0.875 in
- Length of Cut - Fractional: 7/8 in
- Length of Cut - Metric: 22.225 mm
- Length Type: Regular
- Mill Diameter Tolerance: +0.003/-0.000 in
- Number of Flutes: 3
- Overall Length - Decimal: 2.75 in
- Overall Length - Fractional: 2-3/4 in
- Overall Length - Metric: 69.85 mm
- Part Number: N73121
- Shank Diameter Tolerance: -0.0001/-0.0005 in
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Flute Direction: Right Hand
- Variable Index: No
- Weldon flat standard
- Designed for profiling and slotting in all materials
- Excellent performance in difficult-to-cut hard materials
- M42 cobalt lasts longer than high-speed steel
- The 8% cobalt content ensures high edge hardness at elevated temperature levels
- Center-cutting end mills can create three-dimensional shapes and profiles
- Lower helix angle of 30° wraps slower and is optimized for the toughest roughing applications
- Titanium Carbo-Nitride (TiCN) coating offers slightly higher hardness and is primarily used to achieve enhanced abrasive wear resistance
- Higher speeds & increased feeds
- Great abrasive resistance
- Have "lead angles" etched on all tools for CNC resharpening.
Application:
Seco Tools N73121 3/8 in | 3 | 30 Degree | HSS-Co | 0.0200 in | Roughing & Finishing End Mill