Niagara Cutter 17016660 RTM713 Center Cutting Short Length Single End Square End End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 3 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, TiCN Coated
NIACUT 17016660
$70.26
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Number of Flutes: 3
- Length of Cut: 1-1/4 in
- Material: M42 8% Cobalt
- Finish/Coating: TiCN Coated
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.87 mm
- Overall Length: 3-1/2 in
- Cutting Direction: Right Hand
- Helix Angle: 36 deg
- Arbor/Shank Size: 5/8 in
- Cutter Diameter: 5/8 in
- Cutter Diameter - Decimal: 0.625 in
- Cutter Diameter - Metric: 15.87 mm
- Finish: TiCN Coated
- Flute Type: Coarse Pitch
- Length of Cut - Fractional: 1-1/4 in
- Overall Length - Fractional: 3-1/2 in
- Pitch: Coarse
- Series: RTM713
- Shank Type: Weldon Flat
- Length Type: Short Length
- Cutter Diameter - Fractional: 5/8 in
- Type: Center Cutting
- Cobalt is harder than high speed steel and provides better wear resistance, it is commonly used on high tensile alloys
- Titanium carbonitride (TiCN) is harder and more wear resistant than TiN and is commonly used on stainless steels, cast iron and aluminum alloys
- 90 deg cutting edge
- 0.025 in W corner chamfer
- 1.906 in L minimum clamping
- 36 deg axial rake
- 13 deg radial rake
- They are used at reduced speeds for general applications on non-ferrous metals
- 45 deg corner chamfer
- D - Cylindrical tool shape
General Purpose Applications
Niagara Cutter End Mill | Center Cutting Short Length Single End Square End | Series: RTM713 | 5/8 in Cutter Dia | 3-1/2 in Overall Length | 5/8 in | 1-1/4 in Maximum Depth of Cut | 3 Flutes | Coarse Pitch Flute | 5/8 in Shank Dia | Right Hand Cutting | 36 deg Helix Angle | Weldon Flat Shank | ANSI Code: RTM713-0.625-D2-C025.3-Z3 | ISO Code: RTM713.625D2C025.3Z3 | M42 8% Cobalt | TiCN Coated