OSG 1111800501 General Purpose Spiral Point Gun Tap, Right Hand Cutting, M5x0.8 Thread, D4 Thread Limit, 3.5P-4.5P Plug Chamfer, 2 Flutes, Steam Oxide, HSS
- Coolant Through: No
- Material Application: Steel, Stainless Steel, Tool Steel, Die Steel and Nickel Alloys
- Overall Length: 152.4 mm
- Shank Diameter - Decimal: 4.92 mm
- Thread Size: M5x0.8
- Number of Flutes: 2
- Thread Limit: D4
- Material: HSS
- Finish/Coating: Steam Oxide
- Chamfer Type: 3.5P-4.5P Plug
- Cutting Direction: Right Hand
- Measurement System: Metric
- Overall Length - Metric: 152 mm
- Pitch: 0.8 mm
- Point Type: Spiral
- Series: 11118
- Thread Length - Metric: 13 mm
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral point taps push chips forward
- HSS material increased wear-resistance
- Steam oxide surface treatment increases mechanical lubricity
- Long shank provides additional reach capability
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Through Hole Applications
OSG Spiral Point Gun Tap | General Purpose | Series: 11118 | Measurement System: Metric | M5x0.8 | 3.5P-4.5P Plug Chamfer | 2 Flutes | HSS | Steam Oxide | Right Hand Cutting | 13 mm Thread Length | 152 mm Overall Length | 4.92 mm Shank Dia | Steel | Stainless Steel | Tool Steel | Die Steel and Nickel Alloys Material Application | D4 Thread Limit | No Through Coolant (Yes/No)