OSG 1730701 EXOTAP® VA-3® 300 High Performance Spiral Point Tap, Right Hand Cutting, 1/4-28 Thread, H3 Thread Limit, 3.5P-4.5P Plug Chamfer, 3 Flutes, Steam Oxide, HSS-E
- Coolant Through: No
- Material Application: Steel, Stainless Steel, Tool Steel, Die Steel and Nickel Alloys
- Overall Length: 2.5 in
- Shank Diameter - Decimal: 0.255 in
- Thread Length: 0.602 in
- Thread Standard: UNF
- Thread Size: 1/4-28
- Number of Flutes: 3
- Thread Limit: H3
- Material: HSS-E
- Finish/Coating: Steam Oxide
- Chamfer Type: 3.5P-4.5P Plug
- Cutting Direction: Right Hand
- Finish: Steam Oxide
- Measurement System: Imperial
- Overall Length - Fractional: 2-1/2 in
- Series: EXOTAP® VA-3® 300
- Point Type: Spiral
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral point taps push chips forward
- HSS-E material increased wear-resistance
- Steam oxide surface treatment increases mechanical lubricity
- OSG V-coating increased hardness, lubricity and wear-resistance
- TiN coating increased wear-resistance
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Through Hole Applications
OSG Spiral Point Tap | High Performance | Series: EXOTAP VA-3 300 | Measurement System: Imperial | UNF | 1/4-28 | 3.5P-4.5P Plug Chamfer | 3 Flutes | HSS-E | Steam Oxide | Right Hand Cutting | 0.602 in Thread Length | 2-1/2 in Overall Length | 0.255 in Shank Dia | Steel | Stainless Steel | Tool Steel | Die Steel and Nickel Alloys Material Application | H3 Thread Limit | No Through Coolant (Yes/No)