OSG 1980700 142 General Purpose Spiral Point Gun Tap, Right Hand Cutting, M5x0.8 Thread, D4 Thread Limit, 3.5P-4.5P Plug Chamfer, 2 Flutes, Bright, HSS
- Coolant Through: No
- Material Application: Ferrous and Non-Ferrous Metals
- Overall Length: 60.32 mm
- Shank Diameter - Decimal: 4.92 mm
- Thread Size: M5x0.8
- Number of Flutes: 2
- Thread Limit: D4
- Material: HSS
- Finish/Coating: Bright
- Chamfer Type: 3.5P-4.5P Plug
- Cutting Direction: Right Hand
- Measurement System: Metric
- Overall Length - Metric: 60 mm
- Pitch: 0.8 mm
- Point Type: Spiral
- Series: 142
- Thread Length - Metric: 13 mm
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral point taps push chips forward
- HSS material increased wear-resistance
- Bright surface treatment increases mechanical lubricity
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Through Hole Applications
OSG Spiral Point Gun Tap | General Purpose | Series: 142 | Measurement System: Metric | M5x0.8 | 3.5P-4.5P Plug Chamfer | 2 Flutes | HSS | Bright | Right Hand Cutting | 13 mm Thread Length | 60 mm Overall Length | 4.92 mm Shank Dia | Ferrous and Non-Ferrous Metals Material Application | D4 Thread Limit | No Through Coolant (Yes/No)