OSG 20213600 0.06 in Corner Rad, 3/8 in Mill Dia, 1/2 in LOC, 2-1/2 in OAL, 2 Flutes, Carbide, Bright, Corner Radius & Corner Chamfer End Mill
- Corner Radius: 0.06 in
- Number of Flutes: 2
- Material: Carbide
- Length of Cut: 1/2 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.3750 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Overall Length: 2-1/2 in
- Cutting Direction: Right Hand
- Helix Angle: 30 deg
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Diameter: 3/8 in
- Diameter - Fractional: 3/8 in
- End Type: Corner Radius
- Extended Reach: No
- Length of Cut - Fractional: 1/2 in
- Mill Diameter Tolerance: +0 / -0.002 in
- Overall Length - Fractional: 2-1/2 in
- Series: 2021
- Shank Type: Shrink Fit
- Length Type: Stub Length
- Flute Type: Spiral
- Diameter - Decimal: 0.375 in
- Diameter - Metric: 9.525 mm
- Finish: Bright
The EXOCARB® Aero Blizzard® series is part of the OSG premium line of carbide high performance end mills specifically designed for either Aluminum or Copper alloys. Special end cut gashing and offset teeth permit large depths of cut and maximum feed per tooth. Made with polished flutes to enhance tool life and reduce BUE, this end mill yields 45-50% higher metal removal rates in roughing applications, and superior finishing capability.
- Refined geometry Larger depth of cut and maximum feed per tooth
- Ultra smooth Flutes Enhances tool life by reducing BUE
- DLC available on request Ideal for rough and finish contouring.
Application:Aluminum and Copper alloysAny application where productivity and the lowest cost-per-unit is the goalWhen spindle speed is limited (< 10,000 rpm)Aerospace, Job ShopsRoughing, Finishing and Contouring
OSG 20213600 3/8 x 1/2 | 2 Flute | Carbide | 0.0600 in | Bright | Corner Radius & Corner Chamfer End Mill