OSG 3097643 1.5 mm Corner Rad, 6 mm Mill Dia, 9 mm LOC, in OAL, Flutes, , , Corner Radius & Corner Chamfer End Mill
OSG 3097643
$339.72
/ EA
Out of Stock
- Mill Diameter: 6 mm
- Corner Radius: 1.5 mm
- Number of Flutes: 3
- Material: Carbide
- Length of Cut: 9 mm
- Shank Diameter: 8 mm
- Shank Diameter - Decimal: 0.315 in
- Shank Diameter - Metric: 8 mm
- Overall Length: 130 mm
- Cutting Direction: Right Hand
- Helix Angle: 55 deg
- Corner Radius Tolerance: +0.03 / -0.03 mm
- Cutter Diameter: 6 mm
- Diameter: 0.23622 in
- Diameter - Decimal: 0.23622 in
- Diameter - Metric: 6 mm
- End Type: Corner Radius
- Finish: WXS® Coated
- Finish/Coating: WXS® Coated
- Flute Type: Spiral
- Length of Cut - Metric: 9 mm
- Length Type: Pencil Neck
- Mill Diameter Tolerance: +0 / -0.015 mm
- Neck Diameter: 5.9 - 8 mm
- Neck Diameter - Metric: 5.9 - 8 mm
- Neck Length: 62.30 mm
- Overall Length - Metric: 130 mm
- Series: 9580
- Shank Type: Shrink Fit
- Cutter Diameter - Metric: 6 mm
- Type: Center Cutting
The EXOPRO® PHX end mill series is designed exclusively for mold makers, to help them realize greater cost savings and shorter delivery times with their existing equipment. New spiral gash geometry is combined with radial chip thinning principles to create end mills capable of taking deeper depths of cut with length to diameter ratio's previously thought impractical.
- Spiral Gash geometry
- Increases edge strength and reduces chip thickness
- OSG's WXS nano coating
- WXS boasts the absolute highest hardness and heat resistance of any OSG coating
- Available in a wide variety of shapes and lengths To reach any mold cavity or core.
OSG 3097643 0.2362 in Dia | 3 Flute | Carbide | 1.50 mm | WXS | Corner Radius & Corner Chamfer End Mill