OSG 457105311 0.5 mm Corner Rad, 5 mm Mill Dia, 8 mm LOC, in OAL, Flutes, , , Corner Radius & Corner Chamfer End Mill
OSG 457105311
$108.39
/ EA
Out of Stock
- Mill Diameter: 5 mm
- Chamfer Width: 4.8 mm
- Corner Radius: 0.0197 in
- Number of Flutes: 4
- Material: Carbide
- Length of Cut: 8 mm
- Shank Diameter: 6 mm
- Shank Diameter - Decimal: 0.2362 in
- Shank Diameter - Metric: 6 mm
- Overall Length: 90 mm
- Cutting Direction: Right Hand
- Helix Angle: 45 deg
- Cutter Diameter: 5 mm
- Diameter: 0.19685 in
- Diameter - Decimal: 0.19685 in
- End Type: Corner Radius
- Extended Reach: Yes
- Finish: WXS® Coated
- Finish/Coating: WXS® Coated
- Length of Cut - Metric: 8 mm
- Length Type: Regular Length
- Mill Diameter Tolerance: +0 / -0.02 mm
- Overall Length - Metric: 90 mm
- Reach Length: 25 mm
- Series: 4571
- Shank Type: Shrink Fit
- Flute Type: Spiral
- Cutter Diameter - Metric: 5 mm
- Diameter - Metric: 5 mm
- Neck Length: 25 mm
EXOCARB®-WXS end mills are the new industry standard for hard milling. Everything about WXS is designed for rigidity and performance in hardened steel 50 HRC and greater. Substrates, geometry, and proprietary WXS coating are all specifically tailored for hardened steels like D2, A2, S7, H13 and CPM.
- Ultra-fine micrograin carbide
- The hardest most wear resistant carbide possible for incredible wear resistance
- High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance
- High accuracy all but eliminates need for benching and rework for mold makers
- High strength core diameter
- Tools utilize thicker core diameters for the ultimate in strength and rigidity
- WXS coating - +1300 Celsius Oxidation Temp. & +3500Hv in hardness
- Higher coating oxidation temp & hardness dramatically improve wear resistance.
Application:Ideally suited for Hardened steel > 50 HRC.Also works in: Cast Iron, Carbon Steel, Alloy Steel, Die Steel, Hardened Steel 35-50 HRC.Use in combination with High Speed Machining Techniques to optimize performance.
OSG 457105311 0.1969 in Dia | 4 Flute | Carbide | 0.0197 in | WXS | Corner Radius & Corner Chamfer End Mill