OSG 7007100 125 General Purpose Spiral Point Tap, Right Hand Cutting, #6-40 Thread, H2 Thread Limit, 3.5P-4.5P Plug Chamfer, 2 Flutes, Bright, HSS
- Coolant Through: No
- Material Application: Ferrous and Non-Ferrous Metals
- Overall Length: 2 in
- Shank Diameter - Decimal: 0.167 in
- Thread Length: 0.393 in
- Thread Standard: UNF
- Thread Size: #6-40
- Number of Flutes: 2
- Thread Limit: H2
- Material: HSS
- Finish/Coating: Bright
- Chamfer Type: 3.5P-4.5P Plug
- Cutting Direction: Right Hand
- Measurement System: Imperial
- Overall Length - Decimal: 2.12 mm
- Point Type: Spiral
- Series: 125
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral point taps push chips forward
- HSS material increased wear-resistance
- Screw thread insert (STI) tap repair stripped threaded holes
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Through Hole Applications
OSG Spiral Point Tap | General Purpose | Series: 125 | Measurement System: Imperial | UNF | #6-40 | 3.5P-4.5P Plug Chamfer | 2 Flutes | HSS | Bright | Right Hand Cutting | 0.393 in Thread Length | 2.12 in Overall Length | 0.167 in Shank Dia | Ferrous and Non-Ferrous Metals Material Application | H2 Thread Limit | No Through Coolant (Yes/No)