OSG HP434-5002 0.02 in Corner Rad, 1/2 in Mill Dia, 1 in LOC, 3 in OAL, 4 Flutes, Carbide, TiAlN Coated, Corner Radius & Corner Chamfer End Mill
- Mill Diameter: 1/2 in
- Corner Radius: 0.02 in
- Number of Flutes: 4
- Material: Carbide
- Length of Cut: 1 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 3 in
- Cutting Direction: Right Hand
- Helix Angle: 35 deg
- Cutter Diameter: 1/2 in
- Diameter: 1/2 in
- End Type: Corner Radius
- Finish: TiAlN Coated
- Finish/Coating: TiAlN Coated
- Series: HY-PRO® CARB HP434
- Shank Type: Shrink Fit
- Type: Center Cutting
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/2 in
- Diameter - Fractional: 1/2 in
- Diameter - Metric: 12.7 mm
- Diameter - Decimal: 0.5 in
End mills are used to cut and contour molds for plastic parts, which include electric home appliances, die casting dies for automotive parts and stamping molds. To meet today's demanding requirements (smaller size, lower weight and reduced cost), OSG has developed many carbide end mills that are excellent in both processing accuracy and durability.
- Corner radius end mills feature a radius at the corner edge of the mill
- Performance carbide TiAlN end mills for ferrous and non-ferrous materials
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OSG Corner Radius End Mill | Center Cutting Performance Regular Length Single End | Series: HY-PRO CARB HP434 | 1/2 in Cutter Dia | 0.02 in Corner Radius | 3 in Overall Length | 1 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 35 deg Helix Angle | Shrink Fit Shank | Carbide | TiAlN Coated