HY-PRO® CARB HP455-1875 HP455 Center Cutting Super Tough End Mill, 3/16 in Dia Cutter, 5/8 in Max Depth of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL
OSG HP455-1875
$29.86
/ EA
Out of Stock
- Mill Diameter: 3/16 in
- Number of Flutes: 5
- Length of Cut: 5/8 in
- Material: Micrograin Solid Carbide
- Finish/Coating: TiAlN Coated
- Shank Diameter: 3/16 in
- Shank Diameter - Decimal: 0.1875 in
- Shank Diameter - Fractional: 3/16 in
- Shank Diameter - Metric: 4.762 mm
- Overall Length: 2 in
- Cutting Direction: Right Hand
- Helix Angle: 45 deg
- Cutter Diameter: 3/16 in
- Cutter Diameter - Fractional: 3/16 in
- Diameter: 3/16 in
- Diameter - Fractional: 3/16 in
- End Type: Corner Radius
- Finish: TiAlN Coated
- Length of Cut - Fractional: 5/8 in
- Overall Length - Decimal: 2 in
- Series: HP455
- Shank Type: Cylindrical
- Flute Type: Spiral
- Diameter - Decimal: 0.1875 in
- Diameter - Metric: 4.762 mm
The HY-PRO® CARB carbide drill series is an ideal blend of performance and cost efficiency. Strong radial rake combined with precision point geometry and multi-layered coating makes this drill extremely versatile in application. Be it solid or coolant through, these drills yield incredible performance at depths from 3X to 8X diameter.
- Negative radial rake - stronger cutting edge to resist chipping
- Refined honing on cutting edge - provides more consistent performance from the first hole to the last hole
- Multi-layered TiAlN coating - multiple layers provide superior resistance to thermal cracking from heat, versus other mono-layered coatings
- DIN shanks - larger shank provides more rigidity and minimizes the number of holders/collets needed to accommodate all sizes
- Internal coolant holes - coolant delivery at the cutting edge reduces heat and improves chip evacuation, thereby increasing tool life and enabling faster drilling speeds
For ferrous and non-ferrous materials
HY-PRO CARB End Mill | Center Cutting Super Tough | Series: HP455 | 3/16 in Cutter Dia | 2 in Overall Length | 5/8 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 3/16 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Cylindrical Shank | Micrograin Solid Carbide | TiAlN Coated