OSG VG446-1000 0.02 in Corner Rad, 1 in Mill Dia, 1-1/8 in LOC, 4-1/2 in OAL, 4 Flutes, Carbide, TiAlN Coated, Corner Radius & Corner Chamfer End Mill
OSG VG446-1000
$471.46
/ EA
Out of Stock
- Mill Diameter: 1 in
- Chamfer Width: 0.02 in
- Number of Flutes: 4
- Material: Carbide
- Length of Cut: 1-1/8 in
- Shank Diameter: 1 in
- Shank Diameter - Decimal: 1 in
- Shank Diameter - Metric: 25.4 mm
- Overall Length: 4-1/2 in
- Cutting Direction: Right Hand
- Helix Angle: 35 deg
- Cutter Diameter: 1 in
- Diameter: 1 in
- Diameter - Decimal: 1 in
- Diameter - Metric: 25.4 mm
- End Type: Center Cutting
- Finish: TiAlN Coated
- Finish/Coating: TiAlN Coated
- Length of Cut - Fractional: 1-1/8 in
- Neck Diameter: 0.94 in
- Neck Diameter - Decimal: 0.94 in
- Neck Diameter - Metric: 23.87 mm
- Overall Length - Fractional: 4-1/2 in
- Series: VG446
- Shank Type: Weldon Flat
- Length Type: Stub Length
- Flute Type: Spiral
The HY-PRO®-CARB VGx is an entire line up of variable geometry end mills designed to extend tool life and increase metal removal rates by decreasing chatter. Unequal flute spacing breaks up harmonic vibration typically created during milling, enabling cutting performance.
- Unequal flute spacing
- Reduces vibration from harmonic vibration, increasing life and enabling more aggressive milling
- Raised Land Configuration
- Provides additional stability when taking deeper depths of cut for more consistent performance during roughing
- TiAIN Coating
- Provides stable wear resistance in high temperature milling conditions.
Application: Cast iron, Carbon Steels, Alloy Steel, Die Steel, Stainless Steel, Hardened Steel < 45 HRC.Especially advantageous in 300, 400 and PH series Stainless Steels.Stable performance in Nickel Alloys and Cobalt Chrome.Larger sizes available with and without Weldon Flats.
OSG VG446-1000 1.0000 in Dia | 4 Flute | Carbide | TiALN | Corner Radius & Corner Chamfer End Mill